1. Standard Automotive
This category is probably the most common. Each day you see hundreds of cars whether your commuting to work, school or going shopping. Unless you live in a rich eco-friendly area crawling with Teslas, the vast majority of these cars are powered by a gas or diesel engine. Even the hybrid Prius, uses a traditional style engine in a hybrid configuration in order to charge it's battery power train, but I digress.
The standard automotive engine applications, for the most part, are considered light duty. What this means is that the engines are being operated in fairly optimum circumstances. Most cars travel in the middle of the RPM range with moderate amounts of idling. With modern cooling systems and this middle range RPM usage the temperature of a car that is not malfunctioning is relatively close to optimal as well. These factors increase engine life over other types of engine use.
The other distinct advantage that a standard car engine has is that they are generally started daily or close to. It is a generally accepted notion in the oiling industry that most engine wear happens upon start up. The longer an engine sits without running the less oil the bearings are going to retain and the less they will be lubricated when turning the engine over again. This causes pre-mature bearing wear and can reduce the life span and efficiency of an engine. However, since most cars are started daily this can be of minimal concern. The anti-wear additives included in modern oil (zinc dialkyldithiophosphates) allow the oil to hang onto the bearings for longer. Click here to see our blog on the three types of oiling system set ups used in standard automotive applications.
2. Marine
Marine engines are generally put through the harshest environments seen by modern engines. On the water a marine engine sees very little idling and consistently high RPM.
harsh life of a marine engine is the fact that marine engines are tracked by hours instead of miles. This is done both because mileage on the water isn't a relative term and because of the heavy usage requirements of a marine engine. According to www.discoverboating.com 100 hours on a gas powered marine engine is approximately equal to 15,000 miles on a standard automotive engine. Additionally www.boatsafe.com states that a diesel marine engine will generally last about 3 times that of a gas powered marine engine before needing a major rebuild.
3. Industrial
Industrial use engines should rightfully be broken out into two categories. Industrial Vehicles & Stand Alone Engines. Each of these categories are distinctly different in usage when compared to each other and how they need to be maintained.
Industrial Vehicle engines are most similar to standard automotive engines. Most of
Industrial Stand Alone Engines. These engines are commonly used as generators. Both as main and back up power sources. Each having distinct service and maintenance
requirements. While hourly usage is the most accurate measurement to track maintenance requirements. It is also important to perform maintenance on an engine that sits for a long duration. Back up power sources should follow a strict maintenance schedule to prevent failure in the event of a main power source failure. These maintenance schedules should be adjusted according to how frequently they are used and how crucial they are.
For a guide on how to plan a custom oil pan to solve your businesses engine maintenance issues see our "Custom Oil Pan Guide" below. .